Note: Please always provide a phone number in your email inquiries so that we can contact you for any follow-up questions and process your request as quickly as possible.
From your My Account Dashboard you have the ability to view a snapshot of your recent account activity and update your account information. Select a link below to view or edit information.
Highly effective nubbed foam made from thermoset acoustic foam
Rectangular panel (120 cm x 58 cm) with homogeneously porous surface with nubbed profile
Extraordinary heat and flame resistance according to fire protection class DIN 4102 B1 / C-s2, d0 according to DIN EN 13501 (except with heavy foil laminate)
Chemically resistant
In titanium grey
Suitable for different applications, e.g. for soundproofing for machines, appliances, heat pumps, cogeneration units, cladding for machine casings and machine enclosures
Sound absorber WAVER Tec Plus – Chemically resistant with nubs and fire protection plus
Classic nubbed profile, ideal for sound insulation
Thanks to fire protection class DIN 4102 B1 / C-s2, d0 according to DIN EN 13501 (except with heavy foil laminate) flexible uses for soundproofing in the technical area
High heat insulation properties, extremely temperature-resistant, resistant against numerous chemicals
Product data
Format, surface
Rectangular panel (120 cm x 58 cm), nubbed profile
Material thicknesses
3 cm (1.5 cm base/ 1.5 cm nub), 4 cm (2 cm base/ 2 cm nub), 6.3 cm (3.3 cm base/ 3 cm nub)
Special sizes
Cuts, punched parts, special sizes possible upon request
Material
Thermoset acoustic foam
Colours
Titanium grey
Fire classes
DIN 4102 B1, C-s2, d0 according to DIN EN 13501 (except with heavy foil lamination)
The fire classes of the aixFOAM absorbers do not only refer to the material, but always include the products including the mounting options offered by us, such as our STICKY self-adhesive kit.
More information about the fire classes of our sound absorbers is available the relevant aixFOAM knowledge article.
Fastening options
Without, STICKY (Makes your aixFOAM self-adhesive)
Lamination options
Laminated with FLEXO for even more effective insulation of structure-borne sound and sound absorption in the low frequency range
Temperatureresistance
- 200 °C to + 200 °C (+100 °C with heavy acoustic foil lamination)
Thermal conductivity
0,032 – 0,038 W/mK
UV-resistance
Maximum UV resistance, does not yellow
Chemical resistance
According to EN ISO 175, WAVER Tec Plus as a Duromer material is resistant against many media, e.g. all organic solvents. This list of all chemical media is included in the accompanying datasheet.
Harmful substance information
Certified according to Eco-Tex Standard 100 as not harmful to health, mineral-fibre free, CFC-free, propellant-free, made without using halogen-containing hydrocarbons, subject to a mandatory label according to EU directives / GefStoffV.
Tolerance
This high quality acoustic product is made on our precision machinery according to DIN 7715 Part 5 P3.
In the production (foaming) of this acoustic material different sized pores (voids) can arise. Voids are typical for the material, do not represent a quality defect and do not affect the acoustic properties of the absorber.
More information about this product is available, if required, in the accompanying datasheet. We are happy to provide you with this upon request.
Absorption values
The measurements of the sound absorption coefficient were determined according to DIN EN ISO 354 (reverberation room) and refer to an absorber area of 100 cm x 50 cm.
Frequency range
Height 3 cm
Height 4 cm
Height 6,3 cm
125 Hz
0,09
0,12
0,23
250 Hz
0,19
0,33
0,62
500 Hz
0,45
0,60
0,85
1000 Hz
0,69
0,81
0,93
2000 Hz
0,81
0,89
0,97
4000 Hz
0,89
0,92
0,99
Our aixFOAM sound absorbers have been tested for Hertz and pores in the reverberation chamber of renowned institutions. The sound absorption coefficients according to DIN EN ISO 354 (reverberation chamber) stated above were calculated in extensive measurements.
Profit from sound insulation directly from the manufacturer!
At aixFOAM we make sound insulation for applications in room acoustics and technical acoustics. And because we do this particularly well, we have been doing it for 65 years. Over this time we have been constantly working on the further development of our products and therefore are able to offer you highly effective sound absorbers in a modern design.
Our aixFOAM philosophy: We combine customer-oriented advice with the individual, needs-based production of sound insulation solutions. Or in other words: We help you with free advice to find the ideal sound insulation for your project and start to make your absorbers directly after receiving your order. You then receive your sound insulation directly from the factory – naturally in the best quality.
Use of high quality acoustic foams from Germany
Precision manufacturing on the latest CNC cutting machines and systems
Standard solutions or individual small and series manufacturing of noise insulation
Advice, planning, production and brokering of assembly partners
Brand quality
from the manufacturer "Made in Germany"
Production
for you, individually in a few days
Experience
for 65 years soundproofing experts
Award
ISO 9001:2015 certified
Areas of application
‘WAVER Tec Plus combines the popular, classic look of nubbed foam with high heat and flame resistance and resistance against numerous liquids and chemicals. The nubbed foam can be worked extremely easily and above all is used in machine sound insulation, in soundproofing in shipbuilding and vehicle production, as well as in cogeneration plants and heat pumps. As a result of the lamination with heavy acoustic foil, material vibrations can also be dampened.’
Thomas Stollenwerk, customer advisor
We are here for you!
Do you need help or do you have any questions about the product?
Use our help area with brief answers to the most frequently asked questions from our customers.
Of course we are happy to help you with advice, free of charge.
