Bass absorber/ Bass trap for low tone absorption
Low frequencies under control
- Body shape: Prism, bevelled wall edges
- In anthracite, raspberry red, orange, steel grey
- Depending on the size designed for different cutoff frequencies
- Highly-effective as bass dampening in the HiFi room, home cinema, sound studio, music room
Bass absorber/ Bass trap SH012 – Low frequencies under control
- Prism-shaped bass trap for effective soundproofing at low frequencies
- Excellent price-performance ratio
- Improve the bass reproduction for a clear, dry sound without flatter echoes, drumming and humming
More information about the fire classes of our sound absorbers is available the relevant aixFOAM knowledge article.
In the production (foaming) of this acoustic material different sized pores (voids) can arise. Voids are typical for the material, do not represent a quality defect and do not affect the acoustic properties of the absorber.
Unlike for sound absorbers in panel form, which are placed over a large area on wall or ceiling surfaces, it does not make sense to specify pure sound absorption degrees for free-standing absorbers, such as our low-frequency absorbers. This would not be meaningful or physically useful.
Therefore, our bass absorbers from RWTH University were tested for their sound absorption effect in extensive measurements in accordance with DIN 52212, taking into account the equivalent absorption surface. The complete measurement log with detailed explanations and all numerical results can be found in the corresponding data sheet if necessary. We will be happy to send this to you on request.
25 cm x 25 cm
46 cm x 46 cm
|50 Hz||28 Hz||Maximum absorption
|200 Hz||100 Hz|
Profit from sound insulation directly from the manufacturer!
At aixFOAM we make sound insulation for applications in room acoustics and technical acoustics. And because we do this particularly well, we have been doing it for 60 years. Over this time we have been constantly working on the further development of our products and therefore are able to offer you highly effective sound absorbers in a modern design.
Our aixFOAM philosophy: We combine customer-oriented advice with the individual, needs-based production of sound insulation solutions. Or in other words: We help you with free advice to find the ideal sound insulation for your project and start to make your absorbers directly after receiving your order. You then receive your sound insulation directly from the factory – naturally in the best quality.
- Use of high quality acoustic foams from Germany
- Precision manufacturing on the latest CNC cutting machines and systems
- Standard solutions or individual small and series manufacturing of noise insulation
- Advice, planning, production and brokering of assembly partners
"Made in Germany"
in a few days
‘With our bass trap SH012 you receive an all-rounder against irritating bass frequencies – and at a very good price-performance ratio. The larger the absorber selected, the lower the frequencies that can be absorbed. My tip: Stack several bass absorbers on top of each other to strengthen the effect even more. In this way you achieve a precise bass reproduction, without flatter echoes, drumming or humming. You must also ensure that the absorbers are placed in the corners with the points facing into the room.’
Volker Rings, customer advisor
Do you need help or do you have any questions about the product?
Use our help area with brief answers to the most frequently asked questions from our customers.
Of course we are happy to help you with advice, free of charge.
+49 2403 / 83830 - 22
Monday to Friday
08:00 o'clock to 17:00 o'clock
Daily from 00.00 – 24.00 o'clock
This is where you can find some application pictures of our bass absorber SH012.