Search
FLAT Tec Plus Chemically resistant

FLAT Tec Plus

Chemically resistant

Highly effective sound insulation from thermoset acoustic foam

  • Square panel (60 x 60 cm) or rectangular panel (120 x 58 cm) with homogeneously porous surface
  • Extraordinary heat and flame resistance according to DIN 4102 B1 / C-s2, d0 according to DIN EN 13501 (except with heavy foil laminate)
  • Chemically resistant
  • Available in white-grey and titanium grey
  • Suitable for a variety of applications, e.g. for sound insulation booths for machines, for sound insulation in shipbuilding and train building, sound insulation in vehicle production, sound insulation for air ducts and lifts

In 6 simple steps to your perfect acoustics:

Square | 60 cm x 60 cm Rectangle | 100 cm x 50 cm Rectangle | 120 cm x 58 cm
white grey titanium grey
2 cm 3 cm 4 cm 5 cm 8 cm 9,6 cm
Without | no extra mounting accessories STICKY | makes your aixFOAM self-adhesive
4 pack 6 pack 8 pack 10 pack 12 pack 16 pack 24 pack 25 pack 30 pack 60 pack

Quantity delivered

Your chosen product is shipped in packs of 1.
Ready configured? Continue here

Your choice:

We will send you a binding quote asap.

Sound absorber FLAT Tec Plus – Chemically resistant base model with fire protection plus

  • Extremely light, flat sound absorber with fire protection class DIN 4102 B1 / C-s2, d0 according to DIN EN 13501 (except with heavy foil laminate)
  • High sound absorption even with small material thickness
  • High resistance against a large number of chemicals and consistent physical properties over a large temperature range
Sound absorbers with flat surface and higher fire protection class

Product data

Format, surface
Square panel (60 cm x 60 cm) or Rectangular panel (120 cm x 58 cm), flat surface
Material thicknesses
2 cm, 3 cm, 4 cm, 5 cm, 8 cm, 9,6 cm
Special sizes
Cuts, punched parts, special sizes possible upon request
Material
Thermoset acoustic foam
Colours
Titanium grey, white-grey
Fire classes
DIN 4102 B1, C-s2, d0 according to DIN EN 13501 (except with heavy foil lamination)

The fire classes of the aixFOAM absorbers do not only refer to the material, but always include the products including the mounting options offered by us, such as our STICKY self-adhesive kit.

More information about the fire classes of our sound absorbers is available the relevant aixFOAM knowledge article.

Fastening options
Without, STICKY (Makes your aixFOAM self-adhesive)
Lamination options
Laminated with FLEXO for even more effective insulation of structure-borne sound and sound absorption in the low frequency range
Temperatureresistance
- 200 °C to + 200 °C (+100 °C with heavy acoustic foil lamination)
Thermal conductivity
0,032 – 0,038 W/mK
UV-resistance
Maximum UV resistance, does not yellow
Chemical resistance
According to EN ISO 175, FLAT Tec Plus as a Duromer material is resistant against many media, e.g. all organic solvents. This list of all chemical media is included in the accompanying datasheet.
Harmful substance information
Certified according to Eco-Tex Standard 100 as not harmful to health, mineral-fibre free, CFC-free, propellant-free, made without using halogen-containing hydrocarbons, subject to a mandatory label according to EU directives / GefStoffV.
Tolerance
This high quality acoustic product is made on our precision machinery according to DIN 7715 Part 5 P3.

In the production (foaming) of this acoustic material different sized pores (voids) can arise. Voids are typical for the material, do not represent a quality defect and do not affect the acoustic properties of the absorber.

More information about this product is available, if required, in the accompanying datasheet. We are happy to provide you with this upon request.

Absorption values

The measurements of the sound absorption coefficient were determined according to DIN EN ISO 354 (reverberation room) and refer to an absorber area of 100 cm x 50 cm.

Sound absorption coefficients for FLAT Tec Plus in white-grey


Frequency
range
2cm
Height
2 cm
3cm
Height
3 cm
4cm
Height
4 cm
5cm
Height
5 cm
8cm
Height
8 cm
9,6cm
Height
9,6cm
125 Hz 0,08 0,09 0,10 0,20 0,23 0,32
250 Hz 0,19 0,29 0,37 0,55 0,77 0,91
500 Hz 0,48 0,62 0,85 1,05 1,00 1,02
1000 Hz 0,80 0,83 0,89 1,10 1,11 1,10
2000 Hz 0,82 0,85 0,94 1,20 1,21 1,12
4000 Hz 0,89 0,93 1,01 1,20 1,19 1,21

Sound absorption coefficients for FLAT Tec Plus in titanium grey


Frequency
range
2cm
Height
2 cm
3cm
Height
3 cm
4cm
Height
4 cm
5cm
Height
5 cm
8cm
Height
8 cm
9,6cm
Height
9,6 cm
125 Hz 0,07 0,08 0,14 0,18 0,26 0,30
250 Hz 0,14 0,18 0,31 0,47 0,71 0,76
500 Hz 0,23 0,40 0,57 0,75 0,93 0,97
1000 Hz 0,42 0,66 0,76 0,87 0,97 1,01
2000 Hz 0,65 0,80 0,85 0,95 1,01 1,00
4000 Hz 0,78 0,89 0,90 0,98 1,02 1,02
Sound absorber/ sound insulation in the reverberation chamber when determining the absorption values
Our aixFOAM sound absorbers have been tested for Hertz and pores in the reverberation chamber of renowned institutions. The sound absorption coefficients according to DIN EN ISO 354 (reverberation chamber) stated above were calculated in extensive measurements.

Profit from sound insulation directly from the manufacturer!

At aixFOAM we make sound insulation for applications in room acoustics and technical acoustics. And because we do this particularly well, we have been doing it for 65 years. Over this time we have been constantly working on the further development of our products and therefore are able to offer you highly effective sound absorbers in a modern design.

Our aixFOAM philosophy: We combine customer-oriented advice with the individual, needs-based production of sound insulation solutions. Or in other words: We help you with free advice to find the ideal sound insulation for your project and start to make your absorbers directly after receiving your order. You then receive your sound insulation directly from the factory – naturally in the best quality.

  • Use of high quality acoustic foams from Germany
  • Precision manufacturing on the latest CNC cutting machines and systems
  • Standard solutions or individual small and series manufacturing of noise insulation
  • Advice, planning, production and brokering of assembly partners
An aixFOAM employee manufactures sound absorbers for sound insulation.
Brand quality
from the manufacturer
"Made in Germany"
Production
for you, individually
in a few days
Experience
for 65 years
soundproofing experts
Award
ISO 9001:2015 certified
The aixFOAM acoustic experts advise you on the subject of sound insulation free of charge.

‘FLAT Tec Plus is the ideal base model for everyone looking for a resistant and effective sound absorber. With its high heat and flame resistance, it corresponds to fire protection standard 4102 B1 and can be used wherever increased fire protection requirements apply. I recommend it to my customers in particular for sound insulation in vehicle or shipbuilding, for insulating machines or lifts.’

Oliver Solbach, customer advisor

We are here for you!

Do you need help or do you have any questions about the product?

Use our help area with brief answers to the most frequently asked questions from our customers.

Of course we are happy to help you with advice, free of charge.

+49 2403 / 83830 - 22
Monday to Friday
08:00 o'clock to 17:00 o'clock

sales@aixfoam.com
Daily from 00.00 – 24.00 o'clock

Impressions?

This is where you can find some application pictures of our sound absorber FLAT Tec Plus.

Sound absorber FLAT Tec Plus
View images
Callcenter user-circle logout