WAVER Tec Industry standard in absorption


Industry standard in absorption

Acoustic nubbed foam for industrial sound insulation

  • Rectangular panel (100 cm x 50 cm) with nubbed profile
  • In anthracite
  • Many uses, e.g. for machinery casings, engines, electronic devices, compressors, switch cabinets

In 6 simple steps to your perfect acoustics:

3 cm 4 cm 6 cm
Without flame protection | Polyether With flame retardant additive FMVSS302 | Polyether Without flame protection | Polyester With flame retardant additive DIN4102 B2 | Polyether With flame retardant additive UL94HF1 | Polyester
without with lamination
Without | no extra mounting accessories STICKY | makes your aixFOAM self-adhesive
4 pack 8 pack 16 pack

Quantity delivered

Your chosen product is shipped in packs of 1.
Ready configured? Continue here

Your choice:

incl. VAT  excl. Shipping

Nubbed foam WAVER Tec – Your standard for sound insulation in the technical area

  • Economic nubbed foam for effective noise insulation in industry
  • Flexible and varied uses for sound insulation in the high and medium frequency range
  • Easy to work and cut, also with STICKY as an option
Nubbed foam for technical sound insulation

Product data

Format, surface
Rectangular panel (100 cm x 50 cm), nubbed profile
Material thicknesses
3 cm (1.5 cm base/ 1.5 cm nub), 4 cm (2 cm base/ 2 cm nub), 6 cm (3 cm base/ 3 cm nub)
Special sizes
Cuts, punched parts, special sizes possible upon request
Open-cell PUR acoustic foam
Fire classes
PUR-E (without flame protection), PUR-E+ (FMVSS302), PUR-ES (without flame protection), PUR-ES++ (UL94HF1), PUR-E++ (DIN 4102 B2) (only with aixFOAM STICKY), DIN 4102 B1 upon request (see articlel WAVER Tec Plus)

The fire classes of the aixFOAM absorbers do not only refer to the material, but always include the products including the mounting options offered by us, such as our STICKY self-adhesive kit.

More information about the fire classes of our sound absorbers is available the relevant aixFOAM knowledge article.

Fastening options
Without, STICKY (Makes your aixFOAM self-adhesive)
Lamination options
Laminated with FLEXO for even more effective insulation of structure-borne sound and sound absorption in the low frequency range
- 40 °C to + 100 °C
Thermal conductivity
0,033 W/mK – DIN 52612
Harmful substance information
Mineral fibre free, FCKW-frei
This high quality acoustic product is made on our precision machinery according to DIN 7715 Part 5 P3.

More information about this product is available, if required, in the accompanying datasheet. We are happy to provide you with this upon request.

Absorption values

The measurements of the absorption coefficient were performed on PUR-ES acoustic foams from RWTH Aachen. All values refer to absorbers with a size of 100 cm x 50 cm and were calculated according to DIN 52212.

3 cm
4 cm
6 cm
125 Hz 0,10 0,11 0,16
250 Hz 0,21 0,32 0,54
500 Hz 0,50 0,63 1,01
1000 Hz 0,90 0,90 0,99
2000 Hz 0,98 0,91 1,01
4000 Hz 0,93 0,95 1,02
Sound absorber/ sound insulation in the reverberation chamber when determining the absorption values
Our aixFOAM sound absorbers have been tested for Hertz and pores in the reverberation chamber of renowned institutions such as RWTH University or the Technical University in Aachen. The sound absorption coefficients according to DIN 52212 stated above were calculated in extensive measurements.

Profit from sound insulation directly from the manufacturer!

At aixFOAM we make sound insulation for applications in room acoustics and technical acoustics. And because we do this particularly well, we have been doing it for 65 years. Over this time we have been constantly working on the further development of our products and therefore are able to offer you highly effective sound absorbers in a modern design.

Our aixFOAM philosophy: We combine customer-oriented advice with the individual, needs-based production of sound insulation solutions. Or in other words: We help you with free advice to find the ideal sound insulation for your project and start to make your absorbers directly after receiving your order. You then receive your sound insulation directly from the factory – naturally in the best quality.

  • Use of high quality acoustic foams from Germany
  • Precision manufacturing on the latest CNC cutting machines and systems
  • Standard solutions or individual small and series manufacturing of noise insulation
  • Advice, planning, production and brokering of assembly partners
An aixFOAM employee manufactures sound absorbers for sound insulation.
Brand quality
from the manufacturer
"Made in Germany"
for you, individually
in a few days
for 65 years
soundproofing experts
ISO 9001:2015 certified
The aixFOAM acoustic experts advise you on the subject of sound insulation free of charge.

‘WAVER Tec is quite simply the classic for sound insulation in the technical area. As a result of its material properties and its unbeatable price-performance ratio, it is best ideal for sound insulation in industry. It reliably reduces noise on machines, compressors or engines and can be worked extremely easily – e.g. with a knife. In order to reduce material vibrations as well, I recommend lamination with heavy acoustic foil.’

Thomas Stollenwerk, customer advisor

We are here for you!

Do you need help or do you have any questions about the product?

Use our help area with brief answers to the most frequently asked questions from our customers.

Of course we are happy to help you with advice, free of charge.

+49 2403 / 83830 - 22
Monday to Friday
08:00 o'clock to 17:00 o'clock
Daily from 00.00 – 24.00 o'clock


This is where you can find some application pictures of our sound absorber WAVER Tec.

sound absorber WAVER Tec
View images
Callcenter user-circle logout